LM339BIPWR TSSOP-14
Request a quote for genuine LM339BIPWR TSSOP-14 parts from Unit Electronics and get fast global delivery from our Shenzhen and Hong Kong hubs to APAC, Europe, and the Americas. We stock and source parts from TI, Microchip, and MPS, and can provide traceability, batch documentation, and competitive pricing for production and prototype needs. Reach out for volume pricing, reel or cut-tape options, and lead-time guarantees. (This opening CTA is for immediate action —email or request a quote via Unit Electronics'sales channels.)
LM339BIPWR TSSOP-14:Why this Quad Op-Amp Works for Buyers
LM339BIPWR TSSOP-14 key electrical specifications
The LM339BIPWR TSSOP-14 is a quad, general-purpose operational amplifier well suited for low-power and cost-sensitive designs. Key electrical highlights include a gain-bandwidth product ~1.2 MHz, a slew rate ≈0.5 V/µs, and a wide single-supply operating range (refer to the datasheet for exact device/version limits). Typical input offset and accuracy characteristics make it appropriate for sensor conditioning, general buffering, and control loops where high speed is not the primary need but low cost and robustness are. These specs mean designers can use the LM339BIPWR TSSOP-14 for engine/industrial sensors, battery-powered systems, and many analog front-ends where rail-to-rail outputs are not required.
LM339BIPWR TSSOP-14 package and footprint considerations
LM339BIPWR TSSOP-14 is supplied in a TSSOP-14 (PW) package which is compact and suitable for automated SMT assembly. When designing footprints, account for thermal relief, solder fillets, and test pads for reflow profiling. Reel (tape-and-reel) and cut-tape formats are commonly available from distributors —choose reels for high-volume assembly to reduce handling cost. Also consider alternate carriers or brand-sourced packaging if your production requires traceability and specific lot documentation;Unit Electronics can supply reel labeling and certificates on request. Package selection affects PCB routing density and thermal performance;for high ambient or power dissipation designs, ensure adequate copper area and vias near the ground/power returns.
Selecting LM339BIPWR TSSOP-14 for Your Design Requirements
LM339BIPWR TSSOP-14 in single-supply designs
The LM339BIPWR TSSOP-14 performs well in single-supply systems where the input common-mode range includes ground;it is commonly used with supplies from low-voltage battery systems up to higher industrial rails (check the exact version rating). Because the device is not rail-to-rail on the output in many configurations, designs that require full-swing outputs near VCC may need rail-to-rail alternatives. However, in sensor interfaces or comparator-like roles (with appropriate feedback), the LM339BIPWR TSSOP-14 is a cost-effective option. Unit Electronics can help evaluate whether LM339BIPWR TSSOP-14 or a different TI part better suits your single-supply constraints.
LM339BIPWR TSSOP-14 input/output and common-mode range
Designers should check the input common-mode range (typically including ground but limited toward the positive rail) and the allowable differential input voltage. For precision measurements or when inputs swing near rails, add level-shifting or select an alternate op amp. Also evaluate the output load capabilities —the LM2902 family is designed to drive moderate loads but not heavy currents. If your design requires low offset drift across temperature or high precision, compare the LM339BIPWR TSSOP-14's offset spec against precision op amp families;for many control and buffering tasks the LM339BIPWR TSSOP-14 offers the best cost vs. performance.
Sourcing, Pricing &Supply:LM339BIPWR TSSOP-14 Buyers'Practicalities
LM339BIPWR TSSOP-14 genuine sourcing (TI and authorized channels)
To avoid counterfeit or unauthorized parts, source LM339BIPWR TSSOP-14 through authorized distributors or distributors that provide traceability and test reports. Unit Electronics is an independent semiconductor distributor representing major brands (including TI, Microchip, MPS), and we provide manufacturer traceability, lot detail, and QC inspection for all shipments. For production ramps, request sample reels and negotiate MOQ and pricing early. Where lead times are long, we can offer comparable cross-references or managed-inventory programs to keep your production lines moving. Always request datasheets and certificate of conformity when procuring.
LM339BIPWR TSSOP-14 pricing, lead-time and packaging options
Pricing depends on order quantity, packaging (cut tape vs. tape-and-reel), and current global supply conditions. Small prototype orders typically use cut tape or small reels;production runs prefer full reels. Lead times may vary —Unit Electronics leverages inventory in Shenzhen and Hong Kong to shorten transit time to APAC, Europe, and the Americas. For firm quotes, request part number, quantity, and preferred packaging;we’ll return pricing, ETA, and available alternates (when appropriate). For vintage or obsolete alternatives, ask about alternatives and tested substitutes.
Integration, Testing &Validation for LM339BIPWR TSSOP-14
LM339BIPWR TSSOP-14 PCB layout and decoupling recommendations
Good PCB layout improves analog stability:place bypass capacitors close to the LM339BIPWR TSSOP-14 VCC and GND pins (ceramic 0.1 µF plus 1 µF recommended), minimize trace inductance on the power pins, and route sensitive input traces away from digital switching. For multiple op-amps in one package, group decoupling and return vias to reduce ground loops. When using the LM339BIPWR TSSOP-14 in mixed-signal boards, add guard traces for high-impedance inputs and follow TI layout application notes for best stability and noise performance. Unit Electronics can supply TI application notes with shipments on request.
LM339BIPWR TSSOP-14 validation, test points and application notes
Before final release, validate your design across temperature and supply extremes listed in the LM339BIPWR TSSOP-14 datasheet. Add test points for inputs, outputs, and supply rails to expedite debugging. Use TI’s reference designs and application notes for compensation guidance and typical circuits (buffers, integrators, comparators). If your application is safety-critical or automotive, ensure you consult qualification documents and consider Q-grade or automotive variants if available. Unit Electronics can provide links to datasheets, reference designs, and failure-analysis guidance for production testing.
Quick Reference:Key LM339BIPWR TSSOP-14 Specs (table)
| Spec | Typical / Note |
|---|---|
| Gain-Bandwidth | 1.2 MHz (typ). |
| Slew Rate | ≈0.5 V/µs (typ). |
| Package | TSSOP-14 (PW) —LM339BIPWR TSSOP-14 product code. |
| Supply Range | Wide single-supply range (see datasheet for exact ratings). |
| Typical Offset | See product details —product page lists ~2 mV offset for selected variants. |
FAQs (Five items)
Is the LM339BIPWR TSSOP-14 a quad op-amp from TI?
Yes —LM339BIPWR TSSOP-14 is a quad operational amplifier (TSSOP-14) offered by Texas Instruments;see the TI product page and datasheet for full specifications.What packaging and ordering formats are available?
Commonly available in TSSOP-14, sold in cut tape or tape-and-reel;availability varies by distributor and quantity. Unit Electronics can provide reels and MOQ options.Can LM339BIPWR TSSOP-14 be used in single-supply battery designs?
Yes —it supports single-supply operation;check the datasheet for input common-mode limits and confirm that the output swing meets your requirements.Do you offer alternates or direct equivalents?
We can recommend alternates from TI and other brands (Microchip, MPS) depending on performance tradeoffs;we’ll provide datasheet comparisons and price/lead-time options.How quickly can Unit Electronics ship LM339BIPWR TSSOP-14 worldwide?
With inventory in Shenzhen and Hong Kong, we can often ship within days to APAC and within competitive timelines to Europe and the Americas;actual ETA depends on quantity and packaging. Contact sales for a firm ETA.
Conclusion &Final Call to Action
For a cost-effective, proven quad op amp, consider the LM339BIPWR TSSOP-14 for buffering, sensor conditioning, and general-purpose analog tasks. Unit Electronics supplies authentic parts from TI, Microchip, and MPS with traceability, QC, and fast shipping from Shenzhen &Hong Kong. Contact Unit Electronics now for quotes, lead-time guarantees, and application support —provide your part number, quantity, and preferred packaging to get started.
